Current File : //opt/alt/net-snmp11/usr/share/snmp/mibs/SNMP-TLS-TM-MIB.txt
SNMP-TLS-TM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
OBJECT-IDENTITY, mib-2, snmpDomains,
Counter32, Unsigned32, Gauge32, NOTIFICATION-TYPE
FROM SNMPv2-SMI -- RFC 2578 or any update thereof
TEXTUAL-CONVENTION, TimeStamp, RowStatus, StorageType,
AutonomousType
FROM SNMPv2-TC -- RFC 2579 or any update thereof
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580 or any update thereof
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC 3411 or any update thereof
snmpTargetParamsName, snmpTargetAddrName
FROM SNMP-TARGET-MIB -- RFC 3413 or any update thereof
;
snmpTlstmMIB MODULE-IDENTITY
LAST-UPDATED "201107190000Z"
ORGANIZATION "ISMS Working Group"
CONTACT-INFO "WG-EMail: isms@lists.ietf.org
Subscribe: isms-request@lists.ietf.org
Chairs:
Juergen Schoenwaelder
Jacobs University Bremen
Campus Ring 1
28725 Bremen
Germany
+49 421 200-3587
j.schoenwaelder@jacobs-university.de
Russ Mundy
SPARTA, Inc.
7110 Samuel Morse Drive
Columbia, MD 21046
USA
Editor:
Wes Hardaker
SPARTA, Inc.
P.O. Box 382
Davis, CA 95617
USA
ietf@hardakers.net
"
DESCRIPTION "
The TLS Transport Model MIB
Copyright (c) 2010-2011 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info)."
REVISION "201107190000Z"
DESCRIPTION "This version of this MIB module is part of
RFC 6353; see the RFC itself for full legal
notices. The only change was to introduce
new wording to reflect require changes for
IDNA addresses in the SnmpTLSAddress TC."
REVISION "201005070000Z"
DESCRIPTION "This version of this MIB module is part of
RFC 5953; see the RFC itself for full legal
notices."
::= { mib-2 198 }
-- ************************************************
-- subtrees of the SNMP-TLS-TM-MIB
-- ************************************************
snmpTlstmNotifications OBJECT IDENTIFIER ::= { snmpTlstmMIB 0 }
snmpTlstmIdentities OBJECT IDENTIFIER ::= { snmpTlstmMIB 1 }
snmpTlstmObjects OBJECT IDENTIFIER ::= { snmpTlstmMIB 2 }
snmpTlstmConformance OBJECT IDENTIFIER ::= { snmpTlstmMIB 3 }
-- ************************************************
-- snmpTlstmObjects - Objects
-- ************************************************
snmpTLSTCPDomain OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The SNMP over TLS via TCP transport domain. The
corresponding transport address is of type SnmpTLSAddress.
The securityName prefix to be associated with the
snmpTLSTCPDomain is 'tls'. This prefix may be used by
security models or other components to identify which secure
transport infrastructure authenticated a securityName."
REFERENCE
"RFC 2579: Textual Conventions for SMIv2"
::= { snmpDomains 8 }
snmpDTLSUDPDomain OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The SNMP over DTLS via UDP transport domain. The
corresponding transport address is of type SnmpTLSAddress.
The securityName prefix to be associated with the
snmpDTLSUDPDomain is 'dtls'. This prefix may be used by
security models or other components to identify which secure
transport infrastructure authenticated a securityName."
REFERENCE
"RFC 2579: Textual Conventions for SMIv2"
::= { snmpDomains 9 }
SnmpTLSAddress ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1a"
STATUS current
DESCRIPTION
"Represents an IPv4 address, an IPv6 address, or a
US-ASCII-encoded hostname and port number.
An IPv4 address must be in dotted decimal format followed by a
colon ':' (US-ASCII character 0x3A) and a decimal port number
in US-ASCII.
An IPv6 address must be a colon-separated format (as described
in RFC 5952), surrounded by square brackets ('[', US-ASCII
character 0x5B, and ']', US-ASCII character 0x5D), followed by
a colon ':' (US-ASCII character 0x3A) and a decimal port number
in US-ASCII.
A hostname is always in US-ASCII (as per RFC 1123);
internationalized hostnames are encoded as A-labels as specified
in RFC 5890. The hostname is followed by a
colon ':' (US-ASCII character 0x3A) and a decimal port number
in US-ASCII. The name SHOULD be fully qualified whenever
possible.
Values of this textual convention may not be directly usable
as transport-layer addressing information, and may require
run-time resolution. As such, applications that write them
must be prepared for handling errors if such values are not
supported, or cannot be resolved (if resolution occurs at the
time of the management operation).
The DESCRIPTION clause of TransportAddress objects that may
have SnmpTLSAddress values must fully describe how (and
when) such names are to be resolved to IP addresses and vice
versa.
This textual convention SHOULD NOT be used directly in object
definitions since it restricts addresses to a specific
format. However, if it is used, it MAY be used either on its
own or in conjunction with TransportAddressType or
TransportDomain as a pair.
When this textual convention is used as a syntax of an index
object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2 (STD 58). It is RECOMMENDED
that all MIB documents using this textual convention make
explicit any limitations on index component lengths that
management software must observe. This may be done either by
including SIZE constraints on the index components or by
specifying applicable constraints in the conceptual row
DESCRIPTION clause or in the surrounding documentation."
REFERENCE
"RFC 1123: Requirements for Internet Hosts - Application and
Support
RFC 5890: Internationalized Domain Names for Applications (IDNA):
Definitions and Document Framework
RFC 5952: A Recommendation for IPv6 Address Text Representation
"
SYNTAX OCTET STRING (SIZE (1..255))
SnmpTLSFingerprint ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:1x"
STATUS current
DESCRIPTION
"A fingerprint value that can be used to uniquely reference
other data of potentially arbitrary length.
An SnmpTLSFingerprint value is composed of a 1-octet hashing
algorithm identifier followed by the fingerprint value. The
octet value encoded is taken from the IANA TLS HashAlgorithm
Registry (RFC 5246). The remaining octets are filled using the
results of the hashing algorithm.
This TEXTUAL-CONVENTION allows for a zero-length (blank)
SnmpTLSFingerprint value for use in tables where the
fingerprint value may be optional. MIB definitions or
implementations may refuse to accept a zero-length value as
appropriate."
REFERENCE "RFC 5246: The Transport Layer
Security (TLS) Protocol Version 1.2
http://www.iana.org/assignments/tls-parameters/
"
SYNTAX OCTET STRING (SIZE (0..255))
-- Identities for use in the snmpTlstmCertToTSNTable
snmpTlstmCertToTSNMIdentities OBJECT IDENTIFIER
::= { snmpTlstmIdentities 1 }
snmpTlstmCertSpecified OBJECT-IDENTITY
STATUS current
DESCRIPTION "Directly specifies the tmSecurityName to be used for
this certificate. The value of the tmSecurityName
to use is specified in the snmpTlstmCertToTSNData
column. The snmpTlstmCertToTSNData column must
contain a non-zero length SnmpAdminString compliant
value or the mapping described in this row must be
considered a failure."
::= { snmpTlstmCertToTSNMIdentities 1 }
snmpTlstmCertSANRFC822Name OBJECT-IDENTITY
STATUS current
DESCRIPTION "Maps a subjectAltName's rfc822Name to a
tmSecurityName. The local part of the rfc822Name is
passed unaltered but the host-part of the name must
be passed in lowercase. This mapping results in a
1:1 correspondence between equivalent subjectAltName
rfc822Name values and tmSecurityName values except
that the host-part of the name MUST be passed in
lowercase.
Example rfc822Name Field: FooBar@Example.COM
is mapped to tmSecurityName: FooBar@example.com."
::= { snmpTlstmCertToTSNMIdentities 2 }
snmpTlstmCertSANDNSName OBJECT-IDENTITY
STATUS current
DESCRIPTION "Maps a subjectAltName's dNSName to a
tmSecurityName after first converting it to all
lowercase (RFC 5280 does not specify converting to
lowercase so this involves an extra step). This
mapping results in a 1:1 correspondence between
subjectAltName dNSName values and the tmSecurityName
values."
REFERENCE "RFC 5280 - Internet X.509 Public Key Infrastructure
Certificate and Certificate Revocation
List (CRL) Profile."
::= { snmpTlstmCertToTSNMIdentities 3 }
snmpTlstmCertSANIpAddress OBJECT-IDENTITY
STATUS current
DESCRIPTION "Maps a subjectAltName's iPAddress to a
tmSecurityName by transforming the binary encoded
address as follows:
1) for IPv4, the value is converted into a
decimal-dotted quad address (e.g., '192.0.2.1').
2) for IPv6 addresses, the value is converted into a
32-character all lowercase hexadecimal string
without any colon separators.
This mapping results in a 1:1 correspondence between
subjectAltName iPAddress values and the
tmSecurityName values.
The resulting length of an encoded IPv6 address is
the maximum length supported by the View-Based
Access Control Model (VACM). Using both the
Transport Security Model's support for transport
prefixes (see the SNMP-TSM-MIB's
snmpTsmConfigurationUsePrefix object for details)
will result in securityName lengths that exceed what
VACM can handle."
::= { snmpTlstmCertToTSNMIdentities 4 }
snmpTlstmCertSANAny OBJECT-IDENTITY
STATUS current
DESCRIPTION "Maps any of the following fields using the
corresponding mapping algorithms:
|------------+----------------------------|
| Type | Algorithm |
|------------+----------------------------|
| rfc822Name | snmpTlstmCertSANRFC822Name |
| dNSName | snmpTlstmCertSANDNSName |
| iPAddress | snmpTlstmCertSANIpAddress |
|------------+----------------------------|
The first matching subjectAltName value found in the
certificate of the above types MUST be used when
deriving the tmSecurityName. The mapping algorithm
specified in the 'Algorithm' column MUST be used to
derive the tmSecurityName.
This mapping results in a 1:1 correspondence between
subjectAltName values and tmSecurityName values. The
three sub-mapping algorithms produced by this
combined algorithm cannot produce conflicting
results between themselves."
::= { snmpTlstmCertToTSNMIdentities 5 }
snmpTlstmCertCommonName OBJECT-IDENTITY
STATUS current
DESCRIPTION "Maps a certificate's CommonName to a tmSecurityName
after converting it to a UTF-8 encoding. The usage
of CommonNames is deprecated and users are
encouraged to use subjectAltName mapping methods
instead. This mapping results in a 1:1
correspondence between certificate CommonName values
and tmSecurityName values."
::= { snmpTlstmCertToTSNMIdentities 6 }
-- The snmpTlstmSession Group
snmpTlstmSession OBJECT IDENTIFIER ::= { snmpTlstmObjects 1 }
snmpTlstmSessionOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an openSession() request has been executed
as a (D)TLS client, regardless of whether it succeeded or
failed."
::= { snmpTlstmSession 1 }
snmpTlstmSessionClientCloses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a closeSession() request has been
executed as a (D)TLS client, regardless of whether it
succeeded or failed."
::= { snmpTlstmSession 2 }
snmpTlstmSessionOpenErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an openSession() request failed to open a
session as a (D)TLS client, for any reason."
::= { snmpTlstmSession 3 }
snmpTlstmSessionAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a (D)TLS server has accepted a new
connection from a client and has received at least one SNMP
message through it."
::= { snmpTlstmSession 4 }
snmpTlstmSessionServerCloses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a closeSession() request has been
executed as a (D)TLS server, regardless of whether it
succeeded or failed."
::= { snmpTlstmSession 5 }
snmpTlstmSessionNoSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an outgoing message was dropped because
the session associated with the passed tmStateReference was no
longer (or was never) available."
::= { snmpTlstmSession 6 }
snmpTlstmSessionInvalidClientCertificates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an incoming session was not established
on a (D)TLS server because the presented client certificate
was invalid. Reasons for invalidation include, but are not
limited to, cryptographic validation failures or lack of a
suitable mapping row in the snmpTlstmCertToTSNTable."
::= { snmpTlstmSession 7 }
snmpTlstmSessionUnknownServerCertificate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an outgoing session was not established
on a (D)TLS client because the server certificate presented
by an SNMP over (D)TLS server was invalid because no
configured fingerprint or Certification Authority (CA) was
acceptable to validate it.
This may result because there was no entry in the
snmpTlstmAddrTable or because no path could be found to a
known CA."
::= { snmpTlstmSession 8 }
snmpTlstmSessionInvalidServerCertificates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an outgoing session was not established
on a (D)TLS client because the server certificate presented
by an SNMP over (D)TLS server could not be validated even if
the fingerprint or expected validation path was known. That
is, a cryptographic validation error occurred during
certificate validation processing.
Reasons for invalidation include, but are not
limited to, cryptographic validation failures."
::= { snmpTlstmSession 9 }
snmpTlstmSessionInvalidCaches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing messages dropped because the
tmStateReference referred to an invalid cache."
::= { snmpTlstmSession 10 }
-- Configuration Objects
snmpTlstmConfig OBJECT IDENTIFIER ::= { snmpTlstmObjects 2 }
-- Certificate mapping
snmpTlstmCertificateMapping OBJECT IDENTIFIER ::= { snmpTlstmConfig 1 }
snmpTlstmCertToTSNCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of entries in the
snmpTlstmCertToTSNTable."
::= { snmpTlstmCertificateMapping 1 }
snmpTlstmCertToTSNTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime.0 when the snmpTlstmCertToTSNTable was
last modified through any means, or 0 if it has not been
modified since the command responder was started."
::= { snmpTlstmCertificateMapping 2 }
snmpTlstmCertToTSNTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTlstmCertToTSNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used by a (D)TLS server to map the (D)TLS
client's presented X.509 certificate to a tmSecurityName.
On an incoming (D)TLS/SNMP connection, the client's presented
certificate must either be validated based on an established
trust anchor, or it must directly match a fingerprint in this
table. This table does not provide any mechanisms for
configuring the trust anchors; the transfer of any needed
trusted certificates for path validation is expected to occur
through an out-of-band transfer.
Once the certificate has been found acceptable (either by path
validation or directly matching a fingerprint in this table),
this table is consulted to determine the appropriate
tmSecurityName to identify with the remote connection. This
is done by considering each active row from this table in
prioritized order according to its snmpTlstmCertToTSNID value.
Each row's snmpTlstmCertToTSNFingerprint value determines
whether the row is a match for the incoming connection:
1) If the row's snmpTlstmCertToTSNFingerprint value
identifies the presented certificate, then consider the
row as a successful match.
2) If the row's snmpTlstmCertToTSNFingerprint value
identifies a locally held copy of a trusted CA
certificate and that CA certificate was used to
validate the path to the presented certificate, then
consider the row as a successful match.
Once a matching row has been found, the
snmpTlstmCertToTSNMapType value can be used to determine how
the tmSecurityName to associate with the session should be
determined. See the snmpTlstmCertToTSNMapType column's
DESCRIPTION for details on determining the tmSecurityName
value. If it is impossible to determine a tmSecurityName from
the row's data combined with the data presented in the
certificate, then additional rows MUST be searched looking for
another potential match. If a resulting tmSecurityName mapped
from a given row is not compatible with the needed
requirements of a tmSecurityName (e.g., VACM imposes a
32-octet-maximum length and the certificate derived
securityName could be longer), then it must be considered an
invalid match and additional rows MUST be searched looking for
another potential match.
If no matching and valid row can be found, the connection MUST
be closed and SNMP messages MUST NOT be accepted over it.
Missing values of snmpTlstmCertToTSNID are acceptable and
implementations should continue to the next highest numbered
row. It is recommended that administrators skip index values
to leave room for the insertion of future rows (for example,
use values of 10 and 20 when creating initial rows).
Users are encouraged to make use of certificates with
subjectAltName fields that can be used as tmSecurityNames so
that a single root CA certificate can allow all child
certificate's subjectAltName to map directly to a
tmSecurityName via a 1:1 transformation. However, this table
is flexible to allow for situations where existing deployed
certificate infrastructures do not provide adequate
subjectAltName values for use as tmSecurityNames.
Certificates may also be mapped to tmSecurityNames using the
CommonName portion of the Subject field. However, the usage
of the CommonName field is deprecated and thus this usage is
NOT RECOMMENDED. Direct mapping from each individual
certificate fingerprint to a tmSecurityName is also possible
but requires one entry in the table per tmSecurityName and
requires more management operations to completely configure a
device."
::= { snmpTlstmCertificateMapping 3 }
snmpTlstmCertToTSNEntry OBJECT-TYPE
SYNTAX SnmpTlstmCertToTSNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the snmpTlstmCertToTSNTable that specifies a mapping
for an incoming (D)TLS certificate to a tmSecurityName to use
for a connection."
INDEX { snmpTlstmCertToTSNID }
::= { snmpTlstmCertToTSNTable 1 }
SnmpTlstmCertToTSNEntry ::= SEQUENCE {
snmpTlstmCertToTSNID Unsigned32,
snmpTlstmCertToTSNFingerprint SnmpTLSFingerprint,
snmpTlstmCertToTSNMapType AutonomousType,
snmpTlstmCertToTSNData OCTET STRING,
snmpTlstmCertToTSNStorageType StorageType,
snmpTlstmCertToTSNRowStatus RowStatus
}
snmpTlstmCertToTSNID OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique, prioritized index for the given entry. Lower
numbers indicate a higher priority."
::= { snmpTlstmCertToTSNEntry 1 }
snmpTlstmCertToTSNFingerprint OBJECT-TYPE
SYNTAX SnmpTLSFingerprint (SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A cryptographic hash of an X.509 certificate. The results of
a successful matching fingerprint to either the trusted CA in
the certificate validation path or to the certificate itself
is dictated by the snmpTlstmCertToTSNMapType column."
::= { snmpTlstmCertToTSNEntry 2 }
snmpTlstmCertToTSNMapType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the mapping type for deriving a tmSecurityName from
a certificate. Details for mapping of a particular type SHALL
be specified in the DESCRIPTION clause of the OBJECT-IDENTITY
that describes the mapping. If a mapping succeeds it will
return a tmSecurityName for use by the TLSTM model and
processing stops.
If the resulting mapped value is not compatible with the
needed requirements of a tmSecurityName (e.g., VACM imposes a
32-octet-maximum length and the certificate derived
securityName could be longer), then future rows MUST be
searched for additional snmpTlstmCertToTSNFingerprint matches
to look for a mapping that succeeds.
Suitable values for assigning to this object that are defined
within the SNMP-TLS-TM-MIB can be found in the
snmpTlstmCertToTSNMIdentities portion of the MIB tree."
DEFVAL { snmpTlstmCertSpecified }
::= { snmpTlstmCertToTSNEntry 3 }
snmpTlstmCertToTSNData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Auxiliary data used as optional configuration information for
a given mapping specified by the snmpTlstmCertToTSNMapType
column. Only some mapping systems will make use of this
column. The value in this column MUST be ignored for any
mapping type that does not require data present in this
column."
DEFVAL { "" }
::= { snmpTlstmCertToTSNEntry 4 }
snmpTlstmCertToTSNStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to
any columnar objects in the row."
DEFVAL { nonVolatile }
::= { snmpTlstmCertToTSNEntry 5 }
snmpTlstmCertToTSNRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object may be used
to create or remove rows from this table.
To create a row in this table, an administrator must set this
object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are appropriately
configured, the value of the corresponding instance of the
snmpTlstmParamsRowStatus column is notReady(3).
In particular, a newly created row cannot be made active until
the corresponding snmpTlstmCertToTSNFingerprint,
snmpTlstmCertToTSNMapType, and snmpTlstmCertToTSNData columns
have been set.
The following objects may not be modified while the
value of this object is active(1):
- snmpTlstmCertToTSNFingerprint
- snmpTlstmCertToTSNMapType
- snmpTlstmCertToTSNData
An attempt to set these objects while the value of
snmpTlstmParamsRowStatus is active(1) will result in
an inconsistentValue error."
::= { snmpTlstmCertToTSNEntry 6 }
-- Maps tmSecurityNames to certificates for use by the SNMP-TARGET-MIB
snmpTlstmParamsCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of entries in the snmpTlstmParamsTable."
::= { snmpTlstmCertificateMapping 4 }
snmpTlstmParamsTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime.0 when the snmpTlstmParamsTable
was last modified through any means, or 0 if it has not been
modified since the command responder was started."
::= { snmpTlstmCertificateMapping 5 }
snmpTlstmParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTlstmParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used by a (D)TLS client when a (D)TLS
connection is being set up using an entry in the
SNMP-TARGET-MIB. It extends the SNMP-TARGET-MIB's
snmpTargetParamsTable with a fingerprint of a certificate to
use when establishing such a (D)TLS connection."
::= { snmpTlstmCertificateMapping 6 }
snmpTlstmParamsEntry OBJECT-TYPE
SYNTAX SnmpTlstmParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing a fingerprint hash of a locally
held certificate for a given snmpTargetParamsEntry. The
values in this row should be ignored if the connection that
needs to be established, as indicated by the SNMP-TARGET-MIB
infrastructure, is not a certificate and (D)TLS based
connection. The connection SHOULD NOT be established if the
certificate fingerprint stored in this entry does not point to
a valid locally held certificate or if it points to an
unusable certificate (such as might happen when the
certificate's expiration date has been reached)."
INDEX { IMPLIED snmpTargetParamsName }
::= { snmpTlstmParamsTable 1 }
SnmpTlstmParamsEntry ::= SEQUENCE {
snmpTlstmParamsClientFingerprint SnmpTLSFingerprint,
snmpTlstmParamsStorageType StorageType,
snmpTlstmParamsRowStatus RowStatus
}
snmpTlstmParamsClientFingerprint OBJECT-TYPE
SYNTAX SnmpTLSFingerprint
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object stores the hash of the public portion of a
locally held X.509 certificate. The X.509 certificate, its
public key, and the corresponding private key will be used
when initiating a (D)TLS connection as a (D)TLS client."
::= { snmpTlstmParamsEntry 1 }
snmpTlstmParamsStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to
any columnar objects in the row."
DEFVAL { nonVolatile }
::= { snmpTlstmParamsEntry 2 }
snmpTlstmParamsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object may be used
to create or remove rows from this table.
To create a row in this table, an administrator must set this
object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are appropriately
configured, the value of the corresponding instance of the
snmpTlstmParamsRowStatus column is notReady(3).
In particular, a newly created row cannot be made active until
the corresponding snmpTlstmParamsClientFingerprint column has
been set.
The snmpTlstmParamsClientFingerprint object may not be modified
while the value of this object is active(1).
An attempt to set these objects while the value of
snmpTlstmParamsRowStatus is active(1) will result in
an inconsistentValue error."
::= { snmpTlstmParamsEntry 3 }
snmpTlstmAddrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of entries in the snmpTlstmAddrTable."
::= { snmpTlstmCertificateMapping 7 }
snmpTlstmAddrTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime.0 when the snmpTlstmAddrTable
was last modified through any means, or 0 if it has not been
modified since the command responder was started."
::= { snmpTlstmCertificateMapping 8 }
snmpTlstmAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTlstmAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used by a (D)TLS client when a (D)TLS
connection is being set up using an entry in the
SNMP-TARGET-MIB. It extends the SNMP-TARGET-MIB's
snmpTargetAddrTable so that the client can verify that the
correct server has been reached. This verification can use
either a certificate fingerprint, or an identity
authenticated via certification path validation.
If there is an active row in this table corresponding to the
entry in the SNMP-TARGET-MIB that was used to establish the
connection, and the row's snmpTlstmAddrServerFingerprint
column has non-empty value, then the server's presented
certificate is compared with the
snmpTlstmAddrServerFingerprint value (and the
snmpTlstmAddrServerIdentity column is ignored). If the
fingerprint matches, the verification has succeeded. If the
fingerprint does not match, then the connection MUST be
closed.
If the server's presented certificate has passed
certification path validation [RFC5280] to a configured
trust anchor, and an active row exists with a zero-length
snmpTlstmAddrServerFingerprint value, then the
snmpTlstmAddrServerIdentity column contains the expected
host name. This expected host name is then compared against
the server's certificate as follows:
- Implementations MUST support matching the expected host
name against a dNSName in the subjectAltName extension
field and MAY support checking the name against the
CommonName portion of the subject distinguished name.
- The '*' (ASCII 0x2a) wildcard character is allowed in the
dNSName of the subjectAltName extension (and in common
name, if used to store the host name), but only as the
left-most (least significant) DNS label in that value.
This wildcard matches any left-most DNS label in the
server name. That is, the subject *.example.com matches
the server names a.example.com and b.example.com, but does
not match example.com or a.b.example.com. Implementations
MUST support wildcards in certificates as specified above,
but MAY provide a configuration option to disable them.
- If the locally configured name is an internationalized
domain name, conforming implementations MUST convert it to
the ASCII Compatible Encoding (ACE) format for performing
comparisons, as specified in Section 7 of [RFC5280].
If the expected host name fails these conditions then the
connection MUST be closed.
If there is no row in this table corresponding to the entry
in the SNMP-TARGET-MIB and the server can be authorized by
another, implementation-dependent means, then the connection
MAY still proceed."
::= { snmpTlstmCertificateMapping 9 }
snmpTlstmAddrEntry OBJECT-TYPE
SYNTAX SnmpTlstmAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing a copy of a certificate's
fingerprint for a given snmpTargetAddrEntry. The values in
this row should be ignored if the connection that needs to be
established, as indicated by the SNMP-TARGET-MIB
infrastructure, is not a (D)TLS based connection. If an
snmpTlstmAddrEntry exists for a given snmpTargetAddrEntry, then
the presented server certificate MUST match or the connection
MUST NOT be established. If a row in this table does not
exist to match an snmpTargetAddrEntry row, then the connection
SHOULD still proceed if some other certificate validation path
algorithm (e.g., RFC 5280) can be used."
INDEX { IMPLIED snmpTargetAddrName }
::= { snmpTlstmAddrTable 1 }
SnmpTlstmAddrEntry ::= SEQUENCE {
snmpTlstmAddrServerFingerprint SnmpTLSFingerprint,
snmpTlstmAddrServerIdentity SnmpAdminString,
snmpTlstmAddrStorageType StorageType,
snmpTlstmAddrRowStatus RowStatus
}
snmpTlstmAddrServerFingerprint OBJECT-TYPE
SYNTAX SnmpTLSFingerprint
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A cryptographic hash of a public X.509 certificate. This
object should store the hash of the public X.509 certificate
that the remote server should present during the (D)TLS
connection setup. The fingerprint of the presented
certificate and this hash value MUST match exactly or the
connection MUST NOT be established."
DEFVAL { "" }
::= { snmpTlstmAddrEntry 1 }
snmpTlstmAddrServerIdentity OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The reference identity to check against the identity
presented by the remote system."
DEFVAL { "" }
::= { snmpTlstmAddrEntry 2 }
snmpTlstmAddrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to
any columnar objects in the row."
DEFVAL { nonVolatile }
::= { snmpTlstmAddrEntry 3 }
snmpTlstmAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object may be used
to create or remove rows from this table.
To create a row in this table, an administrator must set this
object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the snmpTlstmAddrRowStatus
column is notReady(3).
In particular, a newly created row cannot be made active until
the corresponding snmpTlstmAddrServerFingerprint column has been
set.
Rows MUST NOT be active if the snmpTlstmAddrServerFingerprint
column is blank and the snmpTlstmAddrServerIdentity is set to
'*' since this would insecurely accept any presented
certificate.
The snmpTlstmAddrServerFingerprint object may not be modified
while the value of this object is active(1).
An attempt to set these objects while the value of
snmpTlstmAddrRowStatus is active(1) will result in
an inconsistentValue error."
::= { snmpTlstmAddrEntry 4 }
-- ************************************************
-- snmpTlstmNotifications - Notifications Information
-- ************************************************
snmpTlstmServerCertificateUnknown NOTIFICATION-TYPE
OBJECTS { snmpTlstmSessionUnknownServerCertificate }
STATUS current
DESCRIPTION
"Notification that the server certificate presented by an SNMP
over (D)TLS server was invalid because no configured
fingerprint or CA was acceptable to validate it. This may be
because there was no entry in the snmpTlstmAddrTable or
because no path could be found to known Certification
Authority.
To avoid notification loops, this notification MUST NOT be
sent to servers that themselves have triggered the
notification."
::= { snmpTlstmNotifications 1 }
snmpTlstmServerInvalidCertificate NOTIFICATION-TYPE
OBJECTS { snmpTlstmAddrServerFingerprint,
snmpTlstmSessionInvalidServerCertificates}
STATUS current
DESCRIPTION
"Notification that the server certificate presented by an SNMP
over (D)TLS server could not be validated even if the
fingerprint or expected validation path was known. That is, a
cryptographic validation error occurred during certificate
validation processing.
To avoid notification loops, this notification MUST NOT be
sent to servers that themselves have triggered the
notification."
::= { snmpTlstmNotifications 2 }
-- ************************************************
-- snmpTlstmCompliances - Conformance Information
-- ************************************************
snmpTlstmCompliances OBJECT IDENTIFIER ::= { snmpTlstmConformance 1 }
snmpTlstmGroups OBJECT IDENTIFIER ::= { snmpTlstmConformance 2 }
-- ************************************************
-- Compliance statements
-- ************************************************
snmpTlstmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP engines that support the
SNMP-TLS-TM-MIB"
MODULE
MANDATORY-GROUPS { snmpTlstmStatsGroup,
snmpTlstmIncomingGroup,
snmpTlstmOutgoingGroup,
snmpTlstmNotificationGroup }
::= { snmpTlstmCompliances 1 }
-- ************************************************
-- Units of conformance
-- ************************************************
snmpTlstmStatsGroup OBJECT-GROUP
OBJECTS {
snmpTlstmSessionOpens,
snmpTlstmSessionClientCloses,
snmpTlstmSessionOpenErrors,
snmpTlstmSessionAccepts,
snmpTlstmSessionServerCloses,
snmpTlstmSessionNoSessions,
snmpTlstmSessionInvalidClientCertificates,
snmpTlstmSessionUnknownServerCertificate,
snmpTlstmSessionInvalidServerCertificates,
snmpTlstmSessionInvalidCaches
}
STATUS current
DESCRIPTION
"A collection of objects for maintaining
statistical information of an SNMP engine that
implements the SNMP TLS Transport Model."
::= { snmpTlstmGroups 1 }
snmpTlstmIncomingGroup OBJECT-GROUP
OBJECTS {
snmpTlstmCertToTSNCount,
snmpTlstmCertToTSNTableLastChanged,
snmpTlstmCertToTSNFingerprint,
snmpTlstmCertToTSNMapType,
snmpTlstmCertToTSNData,
snmpTlstmCertToTSNStorageType,
snmpTlstmCertToTSNRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for maintaining
incoming connection certificate mappings to
tmSecurityNames of an SNMP engine that implements the
SNMP TLS Transport Model."
::= { snmpTlstmGroups 2 }
snmpTlstmOutgoingGroup OBJECT-GROUP
OBJECTS {
snmpTlstmParamsCount,
snmpTlstmParamsTableLastChanged,
snmpTlstmParamsClientFingerprint,
snmpTlstmParamsStorageType,
snmpTlstmParamsRowStatus,
snmpTlstmAddrCount,
snmpTlstmAddrTableLastChanged,
snmpTlstmAddrServerFingerprint,
snmpTlstmAddrServerIdentity,
snmpTlstmAddrStorageType,
snmpTlstmAddrRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for maintaining
outgoing connection certificates to use when opening
connections as a result of SNMP-TARGET-MIB settings."
::= { snmpTlstmGroups 3 }
snmpTlstmNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
snmpTlstmServerCertificateUnknown,
snmpTlstmServerInvalidCertificate
}
STATUS current
DESCRIPTION
"Notifications"
::= { snmpTlstmGroups 4 }
END
Mini Shell