Current File : //usr/share/perl5/pod/perl5005delta.pod
=head1 NAME
perl5005delta - what's new for perl5.005
=head1 DESCRIPTION
This document describes differences between the 5.004 release and this one.
=head1 About the new versioning system
Perl is now developed on two tracks: a maintenance track that makes
small, safe updates to released production versions with emphasis on
compatibility; and a development track that pursues more aggressive
evolution. Maintenance releases (which should be considered production
quality) have subversion numbers that run from C<1> to C<49>, and
development releases (which should be considered "alpha" quality) run
from C<50> to C<99>.
Perl 5.005 is the combined product of the new dual-track development
scheme.
=head1 Incompatible Changes
=head2 WARNING: This version is not binary compatible with Perl 5.004.
Starting with Perl 5.004_50 there were many deep and far-reaching changes
to the language internals. If you have dynamically loaded extensions
that you built under perl 5.003 or 5.004, you can continue to use them
with 5.004, but you will need to rebuild and reinstall those extensions
to use them 5.005. See F<INSTALL> for detailed instructions on how to
upgrade.
=head2 Default installation structure has changed
The new Configure defaults are designed to allow a smooth upgrade from
5.004 to 5.005, but you should read F<INSTALL> for a detailed
discussion of the changes in order to adapt them to your system.
=head2 Perl Source Compatibility
When none of the experimental features are enabled, there should be
very few user-visible Perl source compatibility issues.
If threads are enabled, then some caveats apply. C<@_> and C<$_> become
lexical variables. The effect of this should be largely transparent to
the user, but there are some boundary conditions under which user will
need to be aware of the issues. For example, C<local(@_)> results in
a "Can't localize lexical variable @_ ..." message. This may be enabled
in a future version.
Some new keywords have been introduced. These are generally expected to
have very little impact on compatibility. See L<New C<INIT> keyword>,
L<New C<lock> keyword>, and L<New C<qrE<sol>E<sol>> operator>.
Certain barewords are now reserved. Use of these will provoke a warning
if you have asked for them with the C<-w> switch.
See L<C<our> is now a reserved word>.
=head2 C Source Compatibility
There have been a large number of changes in the internals to support
the new features in this release.
=over 4
=item *
Core sources now require ANSI C compiler
An ANSI C compiler is now B<required> to build perl. See F<INSTALL>.
=item *
All Perl global variables must now be referenced with an explicit prefix
All Perl global variables that are visible for use by extensions now
have a C<PL_> prefix. New extensions should C<not> refer to perl globals
by their unqualified names. To preserve sanity, we provide limited
backward compatibility for globals that are being widely used like
C<sv_undef> and C<na> (which should now be written as C<PL_sv_undef>,
C<PL_na> etc.)
If you find that your XS extension does not compile anymore because a
perl global is not visible, try adding a C<PL_> prefix to the global
and rebuild.
It is strongly recommended that all functions in the Perl API that don't
begin with C<perl> be referenced with a C<Perl_> prefix. The bare function
names without the C<Perl_> prefix are supported with macros, but this
support may cease in a future release.
See L<perlapi>.
=item *
Enabling threads has source compatibility issues
Perl built with threading enabled requires extensions to use the new
C<dTHR> macro to initialize the handle to access per-thread data.
If you see a compiler error that talks about the variable C<thr> not
being declared (when building a module that has XS code), you need
to add C<dTHR;> at the beginning of the block that elicited the error.
The API function C<perl_get_sv("@",GV_ADD)> should be used instead of
directly accessing perl globals as C<GvSV(errgv)>. The API call is
backward compatible with existing perls and provides source compatibility
with threading is enabled.
See L</"C Source Compatibility"> for more information.
=back
=head2 Binary Compatibility
This version is NOT binary compatible with older versions. All extensions
will need to be recompiled. Further binaries built with threads enabled
are incompatible with binaries built without. This should largely be
transparent to the user, as all binary incompatible configurations have
their own unique architecture name, and extension binaries get installed at
unique locations. This allows coexistence of several configurations in
the same directory hierarchy. See F<INSTALL>.
=head2 Security fixes may affect compatibility
A few taint leaks and taint omissions have been corrected. This may lead
to "failure" of scripts that used to work with older versions. Compiling
with -DINCOMPLETE_TAINTS provides a perl with minimal amounts of changes
to the tainting behavior. But note that the resulting perl will have
known insecurities.
Oneliners with the C<-e> switch do not create temporary files anymore.
=head2 Relaxed new mandatory warnings introduced in 5.004
Many new warnings that were introduced in 5.004 have been made
optional. Some of these warnings are still present, but perl's new
features make them less often a problem. See L</New Diagnostics>.
=head2 Licensing
Perl has a new Social Contract for contributors. See F<Porting/Contract>.
The license included in much of the Perl documentation has changed.
Most of the Perl documentation was previously under the implicit GNU
General Public License or the Artistic License (at the user's choice).
Now much of the documentation unambiguously states the terms under which
it may be distributed. Those terms are in general much less restrictive
than the GNU GPL. See L<perl> and the individual perl manpages listed
therein.
=head1 Core Changes
=head2 Threads
WARNING: Threading is considered an B<experimental> feature. Details of the
implementation may change without notice. There are known limitations
and some bugs. These are expected to be fixed in future versions.
See F<README.threads>.
=head2 Compiler
WARNING: The Compiler and related tools are considered B<experimental>.
Features may change without notice, and there are known limitations
and bugs. Since the compiler is fully external to perl, the default
configuration will build and install it.
The Compiler produces three different types of transformations of a
perl program. The C backend generates C code that captures perl's state
just before execution begins. It eliminates the compile-time overheads
of the regular perl interpreter, but the run-time performance remains
comparatively the same. The CC backend generates optimized C code
equivalent to the code path at run-time. The CC backend has greater
potential for big optimizations, but only a few optimizations are
implemented currently. The Bytecode backend generates a platform
independent bytecode representation of the interpreter's state
just before execution. Thus, the Bytecode back end also eliminates
much of the compilation overhead of the interpreter.
The compiler comes with several valuable utilities.
C<B::Lint> is an experimental module to detect and warn about suspicious
code, especially the cases that the C<-w> switch does not detect.
C<B::Deparse> can be used to demystify perl code, and understand
how perl optimizes certain constructs.
C<B::Xref> generates cross reference reports of all definition and use
of variables, subroutines and formats in a program.
C<B::Showlex> show the lexical variables used by a subroutine or file
at a glance.
C<perlcc> is a simple frontend for compiling perl.
See C<ext/B/README>, L<B>, and the respective compiler modules.
=head2 Regular Expressions
Perl's regular expression engine has been seriously overhauled, and
many new constructs are supported. Several bugs have been fixed.
Here is an itemized summary:
=over 4
=item Many new and improved optimizations
Changes in the RE engine:
Unneeded nodes removed;
Substrings merged together;
New types of nodes to process (SUBEXPR)* and similar expressions
quickly, used if the SUBEXPR has no side effects and matches
strings of the same length;
Better optimizations by lookup for constant substrings;
Better search for constants substrings anchored by $ ;
Changes in Perl code using RE engine:
More optimizations to s/longer/short/;
study() was not working;
/blah/ may be optimized to an analogue of index() if $& $` $' not seen;
Unneeded copying of matched-against string removed;
Only matched part of the string is copying if $` $' were not seen;
=item Many bug fixes
Note that only the major bug fixes are listed here. See F<Changes> for others.
Backtracking might not restore start of $3.
No feedback if max count for * or + on "complex" subexpression
was reached, similarly (but at compile time) for {3,34567}
Primitive restrictions on max count introduced to decrease a
possibility of a segfault;
(ZERO-LENGTH)* could segfault;
(ZERO-LENGTH)* was prohibited;
Long REs were not allowed;
/RE/g could skip matches at the same position after a
zero-length match;
=item New regular expression constructs
The following new syntax elements are supported:
(?<=RE)
(?<!RE)
(?{ CODE })
(?i-x)
(?i:RE)
(?(COND)YES_RE|NO_RE)
(?>RE)
\z
=item New operator for precompiled regular expressions
See L<New C<qrE<sol>E<sol>> operator>.
=item Other improvements
Better debugging output (possibly with colors),
even from non-debugging Perl;
RE engine code now looks like C, not like assembler;
Behaviour of RE modifiable by `use re' directive;
Improved documentation;
Test suite significantly extended;
Syntax [:^upper:] etc., reserved inside character classes;
=item Incompatible changes
(?i) localized inside enclosing group;
$( is not interpolated into RE any more;
/RE/g may match at the same position (with non-zero length)
after a zero-length match (bug fix).
=back
See L<perlre> and L<perlop>.
=head2 Improved malloc()
See banner at the beginning of C<malloc.c> for details.
=head2 Quicksort is internally implemented
Perl now contains its own highly optimized qsort() routine. The new qsort()
is resistant to inconsistent comparison functions, so Perl's C<sort()> will
not provoke coredumps any more when given poorly written sort subroutines.
(Some C library C<qsort()>s that were being used before used to have this
problem.) In our testing, the new C<qsort()> required the minimal number
of pair-wise compares on average, among all known C<qsort()> implementations.
See C<perlfunc/sort>.
=head2 Reliable signals
Perl's signal handling is susceptible to random crashes, because signals
arrive asynchronously, and the Perl runtime is not reentrant at arbitrary
times.
However, one experimental implementation of reliable signals is available
when threads are enabled. See C<Thread::Signal>. Also see F<INSTALL> for
how to build a Perl capable of threads.
=head2 Reliable stack pointers
The internals now reallocate the perl stack only at predictable times.
In particular, magic calls never trigger reallocations of the stack,
because all reentrancy of the runtime is handled using a "stack of stacks".
This should improve reliability of cached stack pointers in the internals
and in XSUBs.
=head2 More generous treatment of carriage returns
Perl used to complain if it encountered literal carriage returns in
scripts. Now they are mostly treated like whitespace within program text.
Inside string literals and here documents, literal carriage returns are
ignored if they occur paired with linefeeds, or get interpreted as whitespace
if they stand alone. This behavior means that literal carriage returns
in files should be avoided. You can get the older, more compatible (but
less generous) behavior by defining the preprocessor symbol
C<PERL_STRICT_CR> when building perl. Of course, all this has nothing
whatever to do with how escapes like C<\r> are handled within strings.
Note that this doesn't somehow magically allow you to keep all text files
in DOS format. The generous treatment only applies to files that perl
itself parses. If your C compiler doesn't allow carriage returns in
files, you may still be unable to build modules that need a C compiler.
=head2 Memory leaks
C<substr>, C<pos> and C<vec> don't leak memory anymore when used in lvalue
context. Many small leaks that impacted applications that embed multiple
interpreters have been fixed.
=head2 Better support for multiple interpreters
The build-time option C<-DMULTIPLICITY> has had many of the details
reworked. Some previously global variables that should have been
per-interpreter now are. With care, this allows interpreters to call
each other. See the C<PerlInterp> extension on CPAN.
=head2 Behavior of local() on array and hash elements is now well-defined
See L<perlsub/"Temporary Values via local()">.
=head2 C<%!> is transparently tied to the L<Errno> module
See L<perlvar>, and L<Errno>.
=head2 Pseudo-hashes are supported
See L<perlref>.
=head2 C<EXPR foreach EXPR> is supported
See L<perlsyn>.
=head2 Keywords can be globally overridden
See L<perlsub>.
=head2 C<$^E> is meaningful on Win32
See L<perlvar>.
=head2 C<foreach (1..1000000)> optimized
C<foreach (1..1000000)> is now optimized into a counting loop. It does
not try to allocate a 1000000-size list anymore.
=head2 C<Foo::> can be used as implicitly quoted package name
Barewords caused unintuitive behavior when a subroutine with the same
name as a package happened to be defined. Thus, C<new Foo @args>,
use the result of the call to C<Foo()> instead of C<Foo> being treated
as a literal. The recommended way to write barewords in the indirect
object slot is C<new Foo:: @args>. Note that the method C<new()> is
called with a first argument of C<Foo>, not C<Foo::> when you do that.
=head2 C<exists $Foo::{Bar::}> tests existence of a package
It was impossible to test for the existence of a package without
actually creating it before. Now C<exists $Foo::{Bar::}> can be
used to test if the C<Foo::Bar> namespace has been created.
=head2 Better locale support
See L<perllocale>.
=head2 Experimental support for 64-bit platforms
Perl5 has always had 64-bit support on systems with 64-bit longs.
Starting with 5.005, the beginnings of experimental support for systems
with 32-bit long and 64-bit 'long long' integers has been added.
If you add -DUSE_LONG_LONG to your ccflags in config.sh (or manually
define it in perl.h) then perl will be built with 'long long' support.
There will be many compiler warnings, and the resultant perl may not
work on all systems. There are many other issues related to
third-party extensions and libraries. This option exists to allow
people to work on those issues.
=head2 prototype() returns useful results on builtins
See L<perlfunc/prototype>.
=head2 Extended support for exception handling
C<die()> now accepts a reference value, and C<$@> gets set to that
value in exception traps. This makes it possible to propagate
exception objects. This is an undocumented B<experimental> feature.
=head2 Re-blessing in DESTROY() supported for chaining DESTROY() methods
See L<perlobj/Destructors>.
=head2 All C<printf> format conversions are handled internally
See L<perlfunc/printf>.
=head2 New C<INIT> keyword
C<INIT> subs are like C<BEGIN> and C<END>, but they get run just before
the perl runtime begins execution. e.g., the Perl Compiler makes use of
C<INIT> blocks to initialize and resolve pointers to XSUBs.
=head2 New C<lock> keyword
The C<lock> keyword is the fundamental synchronization primitive
in threaded perl. When threads are not enabled, it is currently a noop.
To minimize impact on source compatibility this keyword is "weak", i.e., any
user-defined subroutine of the same name overrides it, unless a C<use Thread>
has been seen.
=head2 New C<qr//> operator
The C<qr//> operator, which is syntactically similar to the other quote-like
operators, is used to create precompiled regular expressions. This compiled
form can now be explicitly passed around in variables, and interpolated in
other regular expressions. See L<perlop>.
=head2 C<our> is now a reserved word
Calling a subroutine with the name C<our> will now provoke a warning when
using the C<-w> switch.
=head2 Tied arrays are now fully supported
See L<Tie::Array>.
=head2 Tied handles support is better
Several missing hooks have been added. There is also a new base class for
TIEARRAY implementations. See L<Tie::Array>.
=head2 4th argument to substr
substr() can now both return and replace in one operation. The optional
4th argument is the replacement string. See L<perlfunc/substr>.
=head2 Negative LENGTH argument to splice
splice() with a negative LENGTH argument now work similar to what the
LENGTH did for substr(). Previously a negative LENGTH was treated as
0. See L<perlfunc/splice>.
=head2 Magic lvalues are now more magical
When you say something like C<substr($x, 5) = "hi">, the scalar returned
by substr() is special, in that any modifications to it affect $x.
(This is called a 'magic lvalue' because an 'lvalue' is something on
the left side of an assignment.) Normally, this is exactly what you
would expect to happen, but Perl uses the same magic if you use substr(),
pos(), or vec() in a context where they might be modified, like taking
a reference with C<\> or as an argument to a sub that modifies C<@_>.
In previous versions, this 'magic' only went one way, but now changes
to the scalar the magic refers to ($x in the above example) affect the
magic lvalue too. For instance, this code now acts differently:
$x = "hello";
sub printit {
$x = "g'bye";
print $_[0], "\n";
}
printit(substr($x, 0, 5));
In previous versions, this would print "hello", but it now prints "g'bye".
=head2 <> now reads in records
If C<$/> is a reference to an integer, or a scalar that holds an integer,
<> will read in records instead of lines. For more info, see
L<perlvar/$E<sol>>.
=head1 Supported Platforms
Configure has many incremental improvements. Site-wide policy for building
perl can now be made persistent, via Policy.sh. Configure also records
the command-line arguments used in F<config.sh>.
=head2 New Platforms
BeOS is now supported. See F<README.beos>.
DOS is now supported under the DJGPP tools. See F<README.dos> (installed
as L<perldos> on some systems).
MiNT is now supported. See F<README.mint>.
MPE/iX is now supported. See README.mpeix.
MVS (aka OS390, aka Open Edition) is now supported. See F<README.os390>
(installed as L<perlos390> on some systems).
Stratus VOS is now supported. See F<README.vos>.
=head2 Changes in existing support
Win32 support has been vastly enhanced. Support for Perl Object, a C++
encapsulation of Perl. GCC and EGCS are now supported on Win32.
See F<README.win32>, aka L<perlwin32>.
VMS configuration system has been rewritten. See F<README.vms> (installed
as F<README_vms> on some systems).
The hints files for most Unix platforms have seen incremental improvements.
=head1 Modules and Pragmata
=head2 New Modules
=over 4
=item B
Perl compiler and tools. See L<B>.
=item Data::Dumper
A module to pretty print Perl data. See L<Data::Dumper>.
=item Dumpvalue
A module to dump perl values to the screen. See L<Dumpvalue>.
=item Errno
A module to look up errors more conveniently. See L<Errno>.
=item File::Spec
A portable API for file operations.
=item ExtUtils::Installed
Query and manage installed modules.
=item ExtUtils::Packlist
Manipulate .packlist files.
=item Fatal
Make functions/builtins succeed or die.
=item IPC::SysV
Constants and other support infrastructure for System V IPC operations
in perl.
=item Test
A framework for writing test suites.
=item Tie::Array
Base class for tied arrays.
=item Tie::Handle
Base class for tied handles.
=item Thread
Perl thread creation, manipulation, and support.
=item attrs
Set subroutine attributes.
=item fields
Compile-time class fields.
=item re
Various pragmata to control behavior of regular expressions.
=back
=head2 Changes in existing modules
=over 4
=item Benchmark
You can now run tests for I<x> seconds instead of guessing the right
number of tests to run.
Keeps better time.
=item Carp
Carp has a new function cluck(). cluck() warns, like carp(), but also adds
a stack backtrace to the error message, like confess().
=item CGI
CGI has been updated to version 2.42.
=item Fcntl
More Fcntl constants added: F_SETLK64, F_SETLKW64, O_LARGEFILE for
large (more than 4G) file access (the 64-bit support is not yet
working, though, so no need to get overly excited), Free/Net/OpenBSD
locking behaviour flags F_FLOCK, F_POSIX, Linux F_SHLCK, and
O_ACCMODE: the mask of O_RDONLY, O_WRONLY, and O_RDWR.
=item Math::Complex
The accessors methods Re, Im, arg, abs, rho, theta, methods can
($z->Re()) now also act as mutators ($z->Re(3)).
=item Math::Trig
A little bit of radial trigonometry (cylindrical and spherical) added,
for example the great circle distance.
=item POSIX
POSIX now has its own platform-specific hints files.
=item DB_File
DB_File supports version 2.x of Berkeley DB. See C<ext/DB_File/Changes>.
=item MakeMaker
MakeMaker now supports writing empty makefiles, provides a way to
specify that site umask() policy should be honored. There is also
better support for manipulation of .packlist files, and getting
information about installed modules.
Extensions that have both architecture-dependent and
architecture-independent files are now always installed completely in
the architecture-dependent locations. Previously, the shareable parts
were shared both across architectures and across perl versions and were
therefore liable to be overwritten with newer versions that might have
subtle incompatibilities.
=item CPAN
See L<perlmodinstall> and L<CPAN>.
=item Cwd
Cwd::cwd is faster on most platforms.
=back
=head1 Utility Changes
C<h2ph> and related utilities have been vastly overhauled.
C<perlcc>, a new experimental front end for the compiler is available.
The crude GNU C<configure> emulator is now called C<configure.gnu> to
avoid trampling on C<Configure> under case-insensitive filesystems.
C<perldoc> used to be rather slow. The slower features are now optional.
In particular, case-insensitive searches need the C<-i> switch, and
recursive searches need C<-r>. You can set these switches in the
C<PERLDOC> environment variable to get the old behavior.
=head1 Documentation Changes
Config.pm now has a glossary of variables.
F<Porting/patching.pod> has detailed instructions on how to create and
submit patches for perl.
L<perlport> specifies guidelines on how to write portably.
L<perlmodinstall> describes how to fetch and install modules from C<CPAN>
sites.
Some more Perl traps are documented now. See L<perltrap>.
L<perlopentut> gives a tutorial on using open().
L<perlreftut> gives a tutorial on references.
L<perlthrtut> gives a tutorial on threads.
=head1 New Diagnostics
=over 4
=item Ambiguous call resolved as CORE::%s(), qualify as such or use &
(W) A subroutine you have declared has the same name as a Perl keyword,
and you have used the name without qualification for calling one or the
other. Perl decided to call the builtin because the subroutine is
not imported.
To force interpretation as a subroutine call, either put an ampersand
before the subroutine name, or qualify the name with its package.
Alternatively, you can import the subroutine (or pretend that it's
imported with the C<use subs> pragma).
To silently interpret it as the Perl operator, use the C<CORE::> prefix
on the operator (e.g. C<CORE::log($x)>) or by declaring the subroutine
to be an object method (see L</attrs>).
=item Bad index while coercing array into hash
(F) The index looked up in the hash found as the 0'th element of a
pseudo-hash is not legal. Index values must be at 1 or greater.
See L<perlref>.
=item Bareword "%s" refers to nonexistent package
(W) You used a qualified bareword of the form C<Foo::>, but
the compiler saw no other uses of that namespace before that point.
Perhaps you need to predeclare a package?
=item Can't call method "%s" on an undefined value
(F) You used the syntax of a method call, but the slot filled by the
object reference or package name contains an undefined value.
Something like this will reproduce the error:
$BADREF = 42;
process $BADREF 1,2,3;
$BADREF->process(1,2,3);
=item Can't check filesystem of script "%s" for nosuid
(P) For some reason you can't check the filesystem of the script for nosuid.
=item Can't coerce array into hash
(F) You used an array where a hash was expected, but the array has no
information on how to map from keys to array indices. You can do that
only with arrays that have a hash reference at index 0.
=item Can't goto subroutine from an eval-string
(F) The "goto subroutine" call can't be used to jump out of an eval "string".
(You can use it to jump out of an eval {BLOCK}, but you probably don't want to.)
=item Can't localize pseudo-hash element
(F) You said something like C<< local $ar->{'key'} >>, where $ar is
a reference to a pseudo-hash. That hasn't been implemented yet, but
you can get a similar effect by localizing the corresponding array
element directly: C<< local $ar->[$ar->[0]{'key'}] >>.
=item Can't use %%! because Errno.pm is not available
(F) The first time the %! hash is used, perl automatically loads the
Errno.pm module. The Errno module is expected to tie the %! hash to
provide symbolic names for C<$!> errno values.
=item Cannot find an opnumber for "%s"
(F) A string of a form C<CORE::word> was given to prototype(), but
there is no builtin with the name C<word>.
=item Character class syntax [. .] is reserved for future extensions
(W) Within regular expression character classes ([]) the syntax beginning
with "[." and ending with ".]" is reserved for future extensions.
If you need to represent those character sequences inside a regular
expression character class, just quote the square brackets with the
backslash: "\[." and ".\]".
=item Character class syntax [: :] is reserved for future extensions
(W) Within regular expression character classes ([]) the syntax beginning
with "[:" and ending with ":]" is reserved for future extensions.
If you need to represent those character sequences inside a regular
expression character class, just quote the square brackets with the
backslash: "\[:" and ":\]".
=item Character class syntax [= =] is reserved for future extensions
(W) Within regular expression character classes ([]) the syntax
beginning with "[=" and ending with "=]" is reserved for future extensions.
If you need to represent those character sequences inside a regular
expression character class, just quote the square brackets with the
backslash: "\[=" and "=\]".
=item %s: Eval-group in insecure regular expression
(F) Perl detected tainted data when trying to compile a regular expression
that contains the C<(?{ ... })> zero-width assertion, which is unsafe.
See L<perlre/(?{ code })>, and L<perlsec>.
=item %s: Eval-group not allowed, use re 'eval'
(F) A regular expression contained the C<(?{ ... })> zero-width assertion,
but that construct is only allowed when the C<use re 'eval'> pragma is
in effect. See L<perlre/(?{ code })>.
=item %s: Eval-group not allowed at run time
(F) Perl tried to compile a regular expression containing the C<(?{ ... })>
zero-width assertion at run time, as it would when the pattern contains
interpolated values. Since that is a security risk, it is not allowed.
If you insist, you may still do this by explicitly building the pattern
from an interpolated string at run time and using that in an eval().
See L<perlre/(?{ code })>.
=item Explicit blessing to '' (assuming package main)
(W) You are blessing a reference to a zero length string. This has
the effect of blessing the reference into the package main. This is
usually not what you want. Consider providing a default target
package, e.g. bless($ref, $p || 'MyPackage');
=item Illegal hex digit ignored
(W) You may have tried to use a character other than 0 - 9 or A - F in a
hexadecimal number. Interpretation of the hexadecimal number stopped
before the illegal character.
=item No such array field
(F) You tried to access an array as a hash, but the field name used is
not defined. The hash at index 0 should map all valid field names to
array indices for that to work.
=item No such field "%s" in variable %s of type %s
(F) You tried to access a field of a typed variable where the type
does not know about the field name. The field names are looked up in
the %FIELDS hash in the type package at compile time. The %FIELDS hash
is usually set up with the 'fields' pragma.
=item Out of memory during ridiculously large request
(F) You can't allocate more than 2^31+"small amount" bytes. This error
is most likely to be caused by a typo in the Perl program. e.g., C<$arr[time]>
instead of C<$arr[$time]>.
=item Range iterator outside integer range
(F) One (or both) of the numeric arguments to the range operator ".."
are outside the range which can be represented by integers internally.
One possible workaround is to force Perl to use magical string
increment by prepending "0" to your numbers.
=item Recursive inheritance detected while looking for method '%s' %s
(F) More than 100 levels of inheritance were encountered while invoking a
method. Probably indicates an unintended loop in your inheritance hierarchy.
=item Reference found where even-sized list expected
(W) You gave a single reference where Perl was expecting a list with
an even number of elements (for assignment to a hash). This
usually means that you used the anon hash constructor when you meant
to use parens. In any case, a hash requires key/value B<pairs>.
%hash = { one => 1, two => 2, }; # WRONG
%hash = [ qw/ an anon array / ]; # WRONG
%hash = ( one => 1, two => 2, ); # right
%hash = qw( one 1 two 2 ); # also fine
=item Undefined value assigned to typeglob
(W) An undefined value was assigned to a typeglob, a la C<*foo = undef>.
This does nothing. It's possible that you really mean C<undef *foo>.
=item Use of reserved word "%s" is deprecated
(D) The indicated bareword is a reserved word. Future versions of perl
may use it as a keyword, so you're better off either explicitly quoting
the word in a manner appropriate for its context of use, or using a
different name altogether. The warning can be suppressed for subroutine
names by either adding a C<&> prefix, or using a package qualifier,
e.g. C<&our()>, or C<Foo::our()>.
=item perl: warning: Setting locale failed.
(S) The whole warning message will look something like:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LC_ALL = "En_US",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Exactly what were the failed locale settings varies. In the above the
settings were that the LC_ALL was "En_US" and the LANG had no value.
This error means that Perl detected that you and/or your system
administrator have set up the so-called variable system but Perl could
not use those settings. This was not dead serious, fortunately: there
is a "default locale" called "C" that Perl can and will use, the
script will be run. Before you really fix the problem, however, you
will get the same error message each time you run Perl. How to really
fix the problem can be found in L<perllocale/"LOCALE PROBLEMS">.
=back
=head1 Obsolete Diagnostics
=over 4
=item Can't mktemp()
(F) The mktemp() routine failed for some reason while trying to process
a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
Removed because B<-e> doesn't use temporary files any more.
=item Can't write to temp file for B<-e>: %s
(F) The write routine failed for some reason while trying to process
a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
Removed because B<-e> doesn't use temporary files any more.
=item Cannot open temporary file
(F) The create routine failed for some reason while trying to process
a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
Removed because B<-e> doesn't use temporary files any more.
=item regexp too big
(F) The current implementation of regular expressions uses shorts as
address offsets within a string. Unfortunately this means that if
the regular expression compiles to longer than 32767, it'll blow up.
Usually when you want a regular expression this big, there is a better
way to do it with multiple statements. See L<perlre>.
=back
=head1 Configuration Changes
You can use "Configure -Uinstallusrbinperl" which causes installperl
to skip installing perl also as /usr/bin/perl. This is useful if you
prefer not to modify /usr/bin for some reason or another but harmful
because many scripts assume to find Perl in /usr/bin/perl.
=head1 BUGS
If you find what you think is a bug, you might check the headers of
recently posted articles in the comp.lang.perl.misc newsgroup.
There may also be information at http://www.perl.com/perl/ , the Perl
Home Page.
If you believe you have an unreported bug, please run the B<perlbug>
program included with your release. Make sure you trim your bug down
to a tiny but sufficient test case. Your bug report, along with the
output of C<perl -V>, will be sent off to <F<perlbug@perl.com>> to be
analysed by the Perl porting team.
=head1 SEE ALSO
The F<Changes> file for exhaustive details on what changed.
The F<INSTALL> file for how to build Perl.
The F<README> file for general stuff.
The F<Artistic> and F<Copying> files for copyright information.
=head1 HISTORY
Written by Gurusamy Sarathy <F<gsar@activestate.com>>, with many contributions
from The Perl Porters.
Send omissions or corrections to <F<perlbug@perl.com>>.
=cut
Mini Shell